Buying guides

mg, mcg and IU: how to read supplement label units

From 500 mcg to 0.5 mg: tables and formulas for reading supplement amounts. When IU can be converted, what GDU means and how to distinguish capsules, daily servings and NRVs.

500 mcg equals 0.5 mg; 1,500 mg equals 1.5 g. When reading a supplement label, grams, milligrams and micrograms are connected by a simple calculation. IU and the GDU shown on bromelain labels need an extra piece of information: what is being measured. This guide helps you compare amounts while keeping mass, activity and the daily serving clear.

The rule to remember: divide by 1,000 to convert mcg to mg; multiply by 1,000 to convert mg to mcg. To convert IU you need to identify the vitamin. To convert GDU to mg you need the raw material's activity per gram.

What is the difference between mg, mcg and µg?

The symbol for a gram is g. A milligram, mg, is one thousandth of a gram; a microgram, µg, is one millionth of a gram. Labels often use mcg, particularly on English-language packaging: it also means microgram.

  • 1 g = 1,000 mg.
  • 1 mg = 1,000 mcg.
  • 1 g = 1,000,000 mcg.

The prefixes milli and micro are defined in the International System of Units; the National Institute of Standards and Technology lists their factors. To check the direction of your calculation, remember that a smaller unit needs a larger number to describe the same mass: 1 mg becomes 1,000 mcg.

How many mg is 500 mcg? A conversion table

Divide micrograms by 1,000 to obtain milligrams. Use the same operation to convert milligrams to grams. The examples below are mathematical equivalents, not recommended doses.

Common mass conversions on supplement labels
Starting amountCalculationEquivalent
50 mcg50 ÷ 1,0000.05 mg
500 mcg500 ÷ 1,0000.5 mg
1,000 mcg1,000 ÷ 1,0001 mg
1,500 mcg1,500 ÷ 1,0001.5 mg
500 mg500 ÷ 1,0000.5 g
1,500 mg1,500 ÷ 1,0001.5 g
3 g3 × 1,0003,000 mg

Watch the separators: this English version uses a decimal point and a comma for thousands. Italian packaging can use the opposite convention: 1.500 mg means one thousand five hundred milligrams, while 1,5 g means one and a half grams. If the layout is ambiguous, cross-check the rest of the packaging or ask the manufacturer.

These conversions also help when comparing powders and tablets. For questions about formats and mixing, see our guide to creatine and taurine.

Can IU be converted to mg or mcg?

There is no universal conversion. IU stands for International Units; Italian labels use UI, Unità Internazionali. The equivalent depends on the substance: the factor used for vitamin D does not apply to vitamin E. For some vitamins, the chemical form also matters.

For vitamin D2 and D3, the relationship is 1 mcg = 40 IU, as reported by the National Institutes of Health Office of Dietary Supplements. Divide IU by 40 to obtain mcg, or multiply mcg by 40 to obtain IU.

Vitamin D2 and D3 conversion examples, not intake recommendations
IU / UIMicrogramsMilligrams
40010 mcg0.01 mg
1,00025 mcg0.025 mg
2,00050 mcg0.05 mg

A statement such as “vitamin D3 1,000 IU / 25 mcg” expresses the same amount in two ways: do not add the numbers together. For vitamin E, identify the form and the labelling convention before calculating: the NIH vitamin E fact sheet distinguishes the conversion factors. Avoid a generic converter that asks only for the number of IU.

How many mg is 2,500 GDU?

The number of GDU alone cannot tell you the milligrams. GDU stands for Gelatin Digesting Units and describes bromelain's enzyme activity measured using a particular method. Milligrams describe mass; GDU describes activity. You also need the GDU/g value: the raw material's activity per gram.

The NOW Foods technical explanation of bromelain illustrates the relationship: 500 mg of bromelain rated at 2,400 GDU/g provides 1,200 GDU. The calculation is 0.5 g × 2,400 GDU/g = 1,200 GDU.

The reverse formula is mg = GDU ÷ (GDU/g) × 1,000. For example, if a raw material is rated at 2,500 GDU/g, 2,500 GDU corresponds to 1,000 mg of that material. This is a calculation example: a different activity per gram gives a different corresponding mass.

Pay particular attention to the slash: 2,500 GDU/g and 2,500 GDU per capsule do not mean the same thing. If the front says only “2,500 GDU”, find the specification in the information panel or technical data sheet before comparing products.

Amount per capsule, daily serving and % NRV: what changes?

You can only compare a number when you know which serving it refers to. A table may show values per capsule, per several capsules or per stated daily serving. In the EU, Directive 2002/46/EC, Articles 6 and 8 requires the recommended daily portion to be stated and the declared amounts to refer to it.

As a hypothetical example, if the daily serving is two capsules and the table states 150 mg of magnesium for that serving, each capsule provides 75 mg, assuming identical capsules. Multiplying 150 mg by two again would count the serving twice.

NRV means Nutrient Reference Value. The percentage compares the amount of a nutrient with the reference value used for labelling. The EU magnesium NRV is 375 mg, according to Annex XIII of Regulation (EU) 1169/2011: 150 ÷ 375 × 100 = 40% NRV.

The % NRV is not the percentage absorbed, a personal prescription or a safe upper limit. US labels use % DV instead: do not compare the percentages without checking the relevant reference values.

For minerals, the words beside the number matter too: a compound's mass differs from the mass of the mineral it contains. As the NIH magnesium fact sheet explains, US Supplement Facts panels declare elemental magnesium. Read the nutrient line rather than relying only on “citrate” or “bisglycinate” on the front. Our guide to ZMA, zinc and magnesium looks more closely at reading these formulas.

How to check a label in five steps

  1. Identify the substance: vitamin, mineral, extract or enzyme.
  2. Read the unit: g, mg and mcg measure mass; IU and GDU need their specific context.
  3. Check the serving: one capsule, several capsules or the daily serving.
  4. Compare the same information: the same substance, unit and serving.
  5. Read the directions and warnings: converting a number does not authorise a change in dose.

Do not exceed the recommended daily serving on the label. Food supplements do not replace a varied, balanced diet and a healthy lifestyle. If you take medicines or have questions about using a product, review its label with a doctor or pharmacist.

Frequently asked questions about label units

How many mg is 50 mcg?

50 mcg equals 0.05 mg. Divide micrograms by 1,000 to obtain milligrams. This conversion describes mass only: it does not identify the substance or tell you how much to take. Before comparing two packs, also check that the amounts refer to the same serving size.

How many grams is 1,500 mg?

1,500 mg equals 1.5 g. Divide milligrams by 1,000. On Italian packaging, the same amount may appear as “1.500 mg” or “1,5 g”. The amount is equivalent; only the conventions for writing thousands and decimal values change between the two languages.

Do mcg and µg mean the same amount?

Yes, both mean micrograms. The spelling mcg is common on English-language labels; µg uses the symbol for the prefix micro. So 500 mcg and 500 µg describe the same mass, equal to 0.5 mg. Do not confuse mcg with mg: they differ by a factor of 1,000.

Does 1,000 IU always equal 25 mcg?

Only in the vitamin D2 or D3 context described here. For these forms, 1 mcg equals 40 IU, so 1,000 ÷ 40 = 25 mcg. Do not apply this factor to vitamin E or other substances: International Units have substance-specific equivalents.

Comments

Leave a comment

Up to 800 characters. Comments are published after review.

Loading...
Back to top